UL iQ™ for Electrical Insulation Systems

Electrical Insulation System Components		E247773
SYNFLEX ELEKTRO GMBH
AUF DEN KREUZEN 24, BLOMBERG Nordrhein-Westfalen 32825 DE
System Component	System Designation	System Class
F/GS, H/GS, SYNkraft VSP H3/36, SYNtherm DM, SYNtherm DMD, SYNtherm NKN, SYNtherm NKN411, SYNtherm NP/50, SYNtherm NP/80, SYNtherm NPN/130 411, SYNtherm NPN/50, SYNtherm NPN/80, SYNtherm VP, SYNtherm VPV, Synglas H 200	SYNFLEX 155-1	155(F)
Report Date: 2004-07-27	© 2024 UL LLC

alternate constructions:

An Authorization Letter is Required for Adoption of this System

Construction Details (Table I)

The use of this insulation system is limited to the combination of materials specified below. Where more than one item is designated under insulation function, they may be used together, unless otherwise indicated, or they may be used as alternates to one another. Functions designated "optional" are not necessarily required for every design. Insulation thicknesses and/or layers below indicated are minimum.

Enameled Wire
Recognized Component - Magnet wire (OBMW2), single build or greater, round or rectangular, copper or aluminum unless stated otherwise for the types listed below
Ground Insulation is required to separate this winding from grounded/dead metal
Interwinding Insulation is required to separate this winding from other enameled wire
Unless otherwise noted, Winding Wire types listed below may be used in combination within a single product
	ANSI Type	Temp(°C)	Basecoat(Topcoat)
	MW 30	or 180°C	Polyester-amide-imide
	MW 35	or 200°C	Polyester-amide-imide (Polyamide-imide)
	MW 36	or 200°C	Polyester-amide-imide (Polyamide-imide)
	MW 73	or 200°C	Polyester-amide-imide (Polyamide-imide)
	MW 79	or 155°C	Polyurethane
	MW 80	or 155°C	Polyurethane (Polyamide)
	MW 82	or 180°C	Polyurethane
	MW 83	or 180°C	Polyurethane (Polyamide)

Ground and Interwinding Insulations
any Recognized Component Plastic (QMFZ2), polyethylene terephthalate film (PET) 3 mils minimum
	Designation	mils(mm)	comments
	CELANESE INTERNATIONAL CORP [E41938] - Recognized Component
	Rynite FR330 * this product is no longer Recognized *	15 (0.38)
	Rynite FR515	15 (0.38)
	Rynite FR530(l)(+)(f1), FR530L(l)(+)(f1)	15 (0.38)
	DuPont Specialty Products USA, LLC [E34739] - Recognized Component
	Nomex® 410	3 (0.08)
	Nomex® 411	7 (0.18)
	Nomex® 414	3 (0.08)
	Nomex® 416, 416 LAM	3 (0.08)
	Nomex® 418, 818, 864LAM	3 (0.08)
	Nomex® 464, 464 LAM	3 (0.08)
	Nomex® E56, 356	4.5 (0.11)
	Mylar Specialty Films [E93687] - Recognized Component
	MYLAR Mylar A, AP, EL21, MO21	3 (0.08)
	Synflex Elektro GmbH
	SYNtherm DM	3 (0.08)	R/C QMFZ2 - Plastics PET film in the composite materials must be a minimum of 3 mils thickness.
	SYNtherm DMD	3 (0.08)	R/C QMFZ2 - Plastics PET film in the composite materials must be a minimum of 3 mils thickness.
	SYNtherm NKN	3 (0.08)	The total Nomex 410, 414, 416, 418 or 464 in the composite materials must be a minimum of 3 mils thickness.
	SYNtherm NKN411	7 (0.18)	The total Nomex 411 in the composite materials must be a minimum of 7 mils thickness.
	SYNtherm NP/80	3 (0.08)	The total Nomex 410, 414, 416, 418 or 464 or R/C QMFZ2 - Plastics PET film in the composite materials must be a minimum of 3 mils thickness.
	SYNtherm NPN/130 411	7 (0.18)	The total Nomex 411 in the composite materials material must be a niminum of 7 mils thickness or the R/C QMFZ2 - Plastics PET film in the composite materials must be a minimum of 3 mils thickness.
	SYNtherm NPN/50	3 (0.08)	The total Nomex 410, 414, 416, 418 or 464 or R/C QMFZ2 - Plastics PET film in the composite materials must be a minimum of 3 mils thickness.
	SYNtherm NPN/80	3 (0.08)	The total Nomex 410, 414, 416, 418 or 464 or R/C QMFZ2 - Plastics PET film in the composite materials must be a minimum of 3 mils thickness.

Lead Wires
lead wires are optional for this system
	Temp	Insulation
	125°C	XLPE - crosslinked polyethylene +
	150°C	XLPE - crosslinked polyethylene
	150°C	XLPO - crosslinked polyolefin
	+ To be isolated from direct contact with windings (magnet wire) by any insulating material (tape, layer insulation, sleeving,etc.) listed in this table - unless specifically excluded from this requirement by a special note at the beginning of this table.

Minor Sheet Materials
(layer, outer, wrap etc.) minor sheet is optional for this system
	Designation	comments
	Synflex Elektro GmbH & Co. KG
	SYNkraft VSP H3/36
	SYNtherm DM
	SYNtherm DMD
	SYNtherm NKN
	SYNtherm NKN411
	SYNtherm NP/50
	SYNtherm NP/80
	SYNtherm NPN/130 411
	SYNtherm NPN/50
	SYNtherm NPN/80
	SYNtherm VP
	SYNtherm VPV
	TOYOBO CO LTD [E51743] - employing Recognized materials
	Teonex Film NQ510, Q5100, Q5300, Q8100, Q8300
any sheet insulation or tape described in this table with no minimum thickness requirement may be used as a minor sheet material
Tapes
tapes are optional for this system
	Designation	comments
	3M COMPANY [E17385] - Listed or Recognized Component
	1350-1 (b)
	1350-2 (c)
	1350T-1 (b)
	1350T-2 (b)
	1350T-3 (b)
	27 (a)
	79
	Synflex Elektro GmbH
	SynTape B 616/ GL.95
	SYNFLEX ELEKTRO GMBH [E301705] - Listed or Recognized Component
	B564
	Synflex Elektro GmbH & Co. KG
	Syntape B 107/11B
	Syntape B 107/P31
	Syntape B 108/9B
	Syntape B 113/P34
	Syntape B/12B
	Syntape B/41B
	Syntape B/P355
	Syntape B/P42
	Syntape B/PR25
	Syntape B/PT25
	Syntape B/PT45
	Syntape B113/10B
	Syntape B354/180B
	Syntape F /PX50)
	Syntape F 366/ 19F
	Syntape F 562/77AH
	Syntape F 562/GL94
	Syntape F/5H
	Syntape F/H50AC
	Syntape F/K30AC
	Syntape F/PS25
	Syntape F/PT2020
	Syntape F/X50
	Syntape F/X80
	Syntape F118/70AC
	Syntape F118/H20AC
	Syntape F131/PT40
	Syntape H 618/GL96
	Syntape H/H50
	Syntape H/K30
	Syntape H428/71SL
	Syntape H428/H20
Tubing and Sleeving
tubing and sleeving are optional for this system
	Designation	comments
	Synflex Elektro GmbH & Co. KG
	F/GS
	H/GS
Tie Cords
tie cords are optional for this system
	Designation	comments
	F. A. Schurig GmbH & Co. KG
	Polyesterschrumpfband
	Synflex Elektro GmbH & Co. KG
	Synglas H 200
Varnishes
varnishes are optional for this system
	Designation	comments
	Axalta Coating Systems Germany GmbH & Co.KG [E101752] - Recognized Component
	Voltatex 4010, Voltatex 4011, Voltabas 0105	May not be used with magnet wire ANSI types MW79, MW80, MW82 and MW83.
	Voltatex 4110	May not be used with magnet wire ANSI types MW79, MW80, MW82 and MW83
	Voltatex 4200, Voltatex 4201, Voltatex 4220, Voltatex 4230, Voltatex 4250, Voltatex 4250 S, Voltatex 4251, Voltatex 4260
	John C Dolph Co [E317427] - Recognized Component
	CC-1105, CC-1105HTC, CC-1103, CC-1105OPT, CC-1105OPT/HTC, CC-1105LV, CB-1105HTC, PDR-1933, PDR-1711, CC-1155, CC-1156, CC-1106	May not be used with magnet wire ANSI type MW30, MW79, MW80, MW82 and MW83.
	XL-2102, XL-2102OPT, XL-2101, XL-2101T, XL-2101OPT, XL-2103, XL-2103LV, XL-2104, XL-2105, XL-2106, XL-2107, XL-2108, XL-2109	May not be used with magnet wire ANSI type MW30